Phosphate

The Lithium Phosphate will continue to offer you the same performance levels twelve months after purchase, whereas typical Sealed Lead Acid (SLA) equivalents will begin to degrade after six month of use.

  • Weight: ±11 lbs (±5 kg))
  • Amp Hours: 40AH
  • Cycle Life: 2500 cycles (at 100% depth of discharge)
  • Power Type: AC

AC Power Systems

The Lithium Phosphate will continue to offer you the same performance levels twelve months after purchase, whereas typical Sealed Lead Acid (SLA) equivalents will begin to degrade after six month of use.

  • For use in patient care areas as per UL, NEC, NFPA and Joint Commission.
  • Output Receptacles: Three NEMA 5-15R outlets (A)
  • Output Voltage: 120V AC / 60 Hz.
  • Output Waveform: True, pure sine-wave output
  • Output Capacity: 150VA continuous/ or 350VA continuous / 700VA peak (B)
  • Input Voltage: 120V AC / 60 Hz. (utility power)
  • HG (hospital-grade) plug
  • Battery Charger Type: Advanced, 3-stage, 10A or 20A
  • Battery Charger Control: Automatic Transfer Switch (ATS)
  • Control Buttons: On/Off & Low Battery Alarm Mute
  • LEDs: Output AC Power, Battery Fuel Gauge
(A) For use in hospital/medical environments—including those where NEC requires hospital-grade receptacles (for proper connection).

DC Power Systems

The Lithium Phosphate will continue to offer you the same performance levels twelve months after purchase, whereas typical Sealed Lead Acid (SLA) equivalents will begin to degrade after six month of use..

  • For use in patient care areas as per UL, NEC, NFPA and Joint Commission.
  • Output Receptacles: A variety of standard adapters supplied
  • Output Voltage: 12V, 15V, or 19V and 12VDC
  • Output Capacity: 120W (nominal)
  • Input Voltage: 120V AC / 60 Hz.
  • HG (hospital-grade) plug
  • Battery Charger Control: Automatic Transfer Switch (ATS)
  • Control Buttons: On/Off & Low Battery Alarm Mute
  • Fully tested, certified and compliant to:
  • UL 60601-1, CAN/CSA-C22.2 No. 601.1-M90, UL 1778


(B) Maximum output capacity (continuous or peak) only available when Battery Module is properly charged. Actual VA levels and durations vary depending on battery age, battery charge level and ambient temperature. The policy of Enovate Medical is one of continuous improvement. Specifications are subject to change without notice.